User:Gesugao-san/Sandbox

This page is currently under construction! The following page is currently in the process of being created, is undergoing a major structural rework and/or is being moved. The reason for this is: "This page is currently undergoing major renovations."

Are you a Roboticist? This guide will explain the creation and maintenance of Cyborgs, bots, MODsuits, and stocky exosuits.

Robotics and Mech Bay

Exosuit Fabricators

These are the main machines used in Robotics, with them you can create various exosuit and cyborg parts and their upgrade modules. Remember to sync these with the R&D servers frequently for new equipment designs and increased production speeds.

Your mini mech is now ready for Ian to take a joyride in!

Ripley APLU

	Requires for construction	Exosuit general information
Raw materials: 100.000 (Metal sheets) 7.500 (Glass) Parts, materials, circuits: 10 x Metal rods, 5 x Metal sheets, 1 x Cable coil, 1 x Scanning Module, 1 x Capacitor, 1 x Power cell, 2 x Ripley circuit boards. Production notes For circuits production check Robotics' Circuit Imprinter and Cargo. For any other part of this list, check Protolathe (any, R&D's or others). Metal rods can be handcrafted from Metal sheets. Tools: , , , (need 2 units of welding fuel from fuel tank ), .		Integrity	200		Techtree node	EXOSUIT: Ripley (Available at round-start)
		Equipment slots	6		Movement speed	Fast (in normal pressure (>50 kPa) — 0,2 sec. delay per move, overwise — 0,15 sec.)
		Upgradable parts	Scanning Module Responsible for power consumption (In watts). None* Walking 500 15 10 5 0 Melee attack 15 Capacitor Responsible for EMP (energy) damage resistance. None* 20% 25% 30% 35% 40% Power cell Responsible for power capacity (in kW). 1 10 20 30 40 * Movement and other actions may not be possible without this stock parts.
		Special abilities	Moves and drills even faster in low pressure environments (like Lavaland, space, etc.). Armor can be upgraded with Goliath plates (melee +10% ballistic +5% laser +5%).
		Description	The Ripley APLU (Autonomous Power Loading Unit) is a low-tech exosuit with high moving speed and no atmospheric protection. Don't expect the wire screen to do much against ranged weapons. Useful for carrying boxes and as a lightweight platform for various exosuit tools. While it lacks the Firefigher's lavaproofing and improved armor, the Ripley APLU can still go toe to toe with Lavaland mobs thanks to its good melee protection. Note about temperature: The exosuit itself can withstand decently high temperatures without taking damage. However, it does not offer protection to the pilot from fire or temperature hazards.
Armor information
Melee Ballistic Laser Energy Bomb Biological Fire Acid Wounds Max temperature 40% 20% 10% 20% 40% None Fully proofed Fully proofed None 20.000°K
Construction steps
1) Build all of the Ripley parts using the Exosuit Fabricator: , , , , ; 2) Attach all of the parts to the Ripley chassis: ; 3) Exosuit chassis construction: 3.1) Use , use , add (1 piece of Cable Coil), use ; 4) Circuit boards: 4.1) Add (Ripley Central Control Module), use ; 4.2) Add (Ripley Peripherals Control Module), use ; 5) Stock parts: 5.1) Add (Scanning Module), use ; 5.2) Add (Capacitor), use ; 5.3) Add(Power cell), use ; 6) Materials: 6.1) Add (5 pieces of Metal sheets), use , use (on); 6.2) Add (5 pieces of Metal rods), use (on).

MODsuits

Click here for the MODsuits page

Exosuits

These can be tremendously helpful or tremendously annoying depending on who uses it. They take more work to make than robots and require special circuits, which are obtained through the Quartermaster or the Research and Development console.

With all Exosuits, MMIs can be installed as drivers. But remember, MMIs are not bound to the AI or its laws, so don't put any deranged maniacs inside them. Remember to grant MMI controlled mechs access keys, because they don't have a keycard on them!

List of Exosuits

Ripley APLU

Equipment slots: 6

Movement speed: Fast.

Special abilities: Even faster movespeed in low pressure environments (Lavaland, space, etc.). Armor can be upgraded with Goliath plates.

Armor: 40 melee, 20 bullet, 10 laser, 20 energy, 40 bomb. 20.000°K max temperature*.

Integrity: 200

Description: The Ripley APLU (Autonomous Power Loading Unit) is a fast moving exosuit with no atmospheric protection. Don't expect the wire screen to do much against ranged weapons. Useful for carrying boxes and as a lightweight platform for various exosuit tools.

While it lacks the Firefigher's lavaproofing and improved armor, the Ripley APLU can still go toe to toe with Lavaland mobs thanks to its good melee protection.

*The exosuit itself can withstand decently high temperatures without taking damage. It does not, however, offer protection to the pilot from fire or temperature hazards.

Click expand for construction steps.

Requires
Minerals: 100.000 7.500 10 x Metal rods 5 x Metal sheets 2 x Ripley circuit boards (also available through Cargo) 1 x Scanning Module. Higher tier = less power consumption. 1 x Capacitor. Higher tier = better EMP resistance. 1 x 1 x

Construction steps:

1. Build all of the Ripley parts using the Exosuit Fabricator.
2. Attach all of the parts to the Ripley chassis
3. Wrench
4. Screwdriver
5. Cable Coil
6. Wirecutters
7. Ripley Central Control Module
8. Screwdriver
9. Ripley Peripherals Control Module
10. Screwdriver
11. Add a Scanning Module
12. Screwdriver
13. Add a Capacitor
14. Screwdriver
15. Power Cell
16. Screwdriver
17. 5 pieces of Metal
18. Wrench
19. Welding Tool
20. 10 metal Rods
21. Welding Tool

Ripley APLU MK-II

Equipment slots: 6

Movement speed: Slow.

Special abilities: Fast movespeed in low pressure environments (Lavaland, space, etc.). Armor can be upgraded with Goliath plates.

Armor: 40 melee, 30 bullet, 30 laser, 30 energy, 60 bomb, 70 rad, 100 fire, 100 acid. 30.000°K max temperature.

Integrity: 250

Description: The Ripley APLU (Autonomous Power Loading Unit) Mark II is a slow moving, decently protected exosuit that's often used for construction, break&entry or fighting Blobs.

The MK-II has a pressurized cabin for space operations, but the added weight has slowed it down. Whether the trade is fair or not depends solely on your purpose for the exosuit.

Requires
Minerals: 10.000 10.000 1 x Ripley APLU MK-I

The Ripley MK-II is created by using a conversion kit on a Ripley MK-I exosuit. This kit is available from the Exosuit Fabricator. The conversion process requires the MK-I to have an empty cargo bay, no pilot sitting inside, and the Maintenance Procedures function permitted.
Once converted to the MK-II design, the exosuit cannot be restored to MK-I.

---