User:Jonttte
HI!! Welcome to my userpage!
I'm a mentor on paradise station. Though, when I play SS13 I tend to split my time fairly evenly between Paradise Station and CM-SS13.
Good luck on your wiki adventures, traveler. Always remember: YOU are BASED!
Epic Userbox modified from LordisMangis's templates:
Very Epic ↑
↓ Wip in progress below ↓
Full page: Guide to Engineering
Fixing Stuff
Fixing good
Icon | Type | Description | Repairing |
---|---|---|---|
File:Window.png | Damaged | The window is cracked. Examining shows that the window is slightly damaged, heavily damaged or falling apart. |
|
File:Window.png | Destroyed | The window is fully destroyed |
|
Camera Networks
Camera monitors are all connected to certain networks when built. Cameras can be connected to networks during the screwdriving step of construction.
See which monitor is connected to which network on the table below:
Note:
- The table only lists networks that newly built camera monitors connect to, camera monitors that spawn on the station might be connected to additional networks.
- The networks are case-sensitive and must be spelled out as shown.
Camera Console | Networks |
Security Camera Console |
|
---|---|
Entertainment Monitor |
|
Wooden TV |
|
Outpost Camera Monitor |
|
Engineering Camera Monitor |
|
Research Monitor |
|
Research Director Monitor |
|
Prison Monitor |
|
Interrogation Monitor |
|
MiniSat Monitor |
|
AI Upload Monitor |
|
Vault Monitor |
|
Turbine Vent Monitor |
|
Engine Camera Monitor |
|
Hull Breaches
The first thing you should do in the case of a hull breach is seal off the breached area from the general public, in order to prevent injuries and further atmospheric losses. Have an Atmos tech use a Holofan Projector to seal off areas, and use an Engineering Barrier Projector to keep people from entering spaced areas. If holofans aren't available, consider using inflatable barriers to do the job instead.
If there are missing floors, use metal rods to create lattices, and then use floor tiles on the lattice to create floor plating. Otherwise, replace the walls and windows as needed.
Restoring Atmospherics
This is a job for your local Atmos Wizards but if they're not available you'll need to help out. Ensure that all of the supply pipes (blue pipes) are wrenched down and all the unary vents are also wrenched down. If the Air Alarm is intact then air should flow into the room and pressurize it.
If this is an area without vents, then use Oxygen grenades or a portable air injector with an O2 tank to finish the job.
For more information check the Guide to Atmospherics.
Widespread Destruction
A max cap will inevitably be detonated on the station or the SM might decide to have a meltdown. This often leaves sections of the entire station destroyed and rendered unusable. Sometimes you can fix it, sometimes you cant. Engineering will have to work as a team to fix this issue.
While there's no one way to go about fixing these issues here are a few tips
- Focus on sealing breaches as quickly as possible first. Mesons are useful for seeing breaches through walls.
- Make sure to establish a pressurized escape route for those who are isolated because of the damage.
- Prioritize rebuilding parts of the station in this order: Escape, Central Primary Hallway/Starboard Primary Hallways, Arrivals, Medbay, other departments, everything else.
If you cannot rebuild an area, consider just walling it off and having the CE condemn the area. Doing so will bar anyone from going into it.