Guide to Robotics

This page needs to be reviewed/updated:
REASON: REMOVE THE DAMN LEVEL 1 HEADERS

Science Department

Departmental Head
Research Director

Science Roles

Research Director •

Scientist •

Geneticist •

Roboticist

Science Guides

R&D • R&D Breakdown List •

Adv. Construction •

Robotics •

MODsuits •

Chemical Research •

Xenobiology •

Toxins •

Genetics •

Teleportation •

Research Items •

Autolathe •

Anomalies •

Science SOP

Return to Science Portal

Robotics and the Mech Bay

For the aspiring Roboticist, this guide will explain the creation and maintenance of Bots, Cyborgs, Exosuits and IPCs.

Robotics Machines

Exosuit Fabricator

The Exosuit Fabricator is your main construction machine, you feed materials into it, and it builds all the things you could need. It can make prosthetic limbs, cyborg parts and internal components, exosuit parts, exosuit equipment modules, and a variety of useful miscellaneous items like power cells. It has a vast variety of blueprints available to start, but certain advanced things must be unlocked by raising your research levels. These will be explained later.

It can be upgraded with stock parts.

• Upgrading the Laser will increase material efficiency, reducing the number of materials you require to build things.
• Upgrading the Manipulators will increase speed efficiency, reducing the time required to build various parts.
• Upgrading the Matter Bins will allow it to store more materials.

Circuit Imprinter

The Circuit Imprinter is where you print all the circuits you need for exosuits or Robotics related machinery, you feed sulphuric acid into it, along with glass. It cannot create upgrade boards for cyborgs, it can create all legal boards related to the AI though. Like the Exosuit Fabricator, many of these advanced borgs must first be unlocked.

It can be upgraded with stock parts.

• Upgrading the Matter Bins will allow it to store more materials.
• Upgrading the Manipulators will increase material efficiency, reducing the number of materials you require to build things.

Autolathe

You don't start with one of those, but they are very useful both for you and for the scientists in RnD next door. It can make the various parts you need for bots, tools in case you need spares and much more. You have access to tech storage, so it's usually a good idea to go there, get the circuit board and set one up in an area both you and the scientists can reach. To get the stock parts, just deconstruct one of your exosuit fabbers, then use the Autolathe to print more stock parts and rebuild the fabber.

Protolathe

Another very handy machine you don't start with. Once you have an Autolathe, simply print a Protolathe circuit board on the Circuit Imprinter, add stock parts from the Autolathe and you're done. Place it close to your R&D Console, then simply link the devices in the R&D Console's device linkage menu.

You and your Tools

As a roboticist, you start off the shift with a belt of tools essential to do your job. The tools can range in usefulness but useful nevertheless.

Item	CollapseDescription
Tool Belt	Contains 7 slots and holds all standard tools you will need to assemble, fix, and deconstruct machines.
Cable Coil	Used in construction of Exosuits and Cyborgs, also used to heal burns inflicted on Cyborgs and IPCs.
Welding Tool	A handy tool used for repairs and deconstruction, make sure it's fueled and lit before use. Commonly used to repair damages on Bots, Cyborgs, Exosuits, and IPCs. Contains 20 Fuel and can be refilled at a welding tank.
Wirecutters	Used for hacking, removing cables, and cutting grilles. Wirecutters are used to trim wires in exosuits and hacking Cyborgs.
Wrench	Wrenches are usually used to take things apart, like wall-girders or tables. Wrenches are barely used in the average shift as a roboticist, only being used in the construction of exosuits.
Screwdriver	Screwdrivers are used to unscrew panels on IPCs and Cyborgs. They can also be used in construction of Exosuits.
Crowbar	The crowbar can pry open things and is used in de-constructing objects like computers and airlocks. Crowbars can be used in opening up cyborgs and surgery on IPCs.
Multitool	The multitool is for hacking. You pulse wires in cyborgs to test their useage. It's also used in IPC surgery.
Cyborg Analyzer	The cyborg analyzer can be quite useful in repairing Cyborgs and IPCs allowing easy diagnosing of damages. It does not however fit within Toolbelts.

Cyborgs

See also Cyborgification Contracts. These contracts are important - without a signed contract making a man into a machine is technically murder - no matter how much they want it!

The Cyborg is the Roboticist's primary creation and upkeep. They are tasked with helping the station's inhabitants in their daily life and trying to kill everyone when the AI is insane. Each cyborg is required to follow the AI's laws and may choose one of the AIs if more than one exists.

It is generally a good idea to have one or two empty cyborg bodies built and ready for people that want to become cyborgs and to let dead players rejoin the round as borgs. Make sure you have a positronic or robotic brain lying around (robotic brains can be made in the medical section of the exosuit fabricator with sufficient research levels) and keep activating it from time to time. If a player's positronic or robotic brain is "dead" (completely inactive), use it in hand to reboot it.

Expand

Making a Cyborg

1. Fill the Exosuit Fabricator with 50 sheets of metal.
2. Click on the Exosuit Fabricator to open its menu. Select Add To Queue for Robot Endoskeleton, Left Arm, Right Arm, Left Leg, Right Leg, Torso, and Head, then click on Process Queue in the right side.
3. Wait for a short time for the pieces to be built.
4. When putting the parts together, use the Robot Endoskeleton as a base. Attach components by picking them up and then clicking on the endoskeleton.
   • Add 2x Synthetic Flash to the Head before attaching it. You do this by picking up the flashes and then clicking on the head.
   • The Cyborg Torso will need 1x wires and 1x power cell. It is recommended you apply the best powercell you can manufacture for the cyborg as the cell determines their maximum charge.
   • The arms and legs can be done easily by simply picking them up and placing them on the Cyborg Endoskeleton.
5. The last step is installing either an MMI or aposibrain, or robotic brain.
   • Posibrains and robotic brains need to be active. If you got it from a destroyed Cyborg or removed it from an IPC or IRC, that shouldn't be an issue, but a freshly printed one must first be activated, which gives ghosts a chance to enter the brain and rejoin the round. If the activation failed, then no ghost wanted to enter the brain, try again later. Printing and activating more than one Robotic Brain does not increase the odds a player will join as a robotic brain.

Expand

Extracting a Brain

Note: Remember to label body bags as being cyborgified, it will clear up bookkeeping problems regarding the addition of a new cadaver in the morgue.

1. (Optional) Complete Prepping for Surgery.
2. Aim for the Head Damage Zone.
3. Use a Scalpel on the patient, and choose Organ Manipulation.
4. Use a Scalpel to cut back the flesh.
5. Use the Hemostat to stop any potential bleeding.
6. Use your Retractors to lift up the skin.
7. Use the Saw to cut through the bones.
8. Use the Retractor to separate the bones.
9. Use the Hemostat. This will open up a window asking you which loose organ you'd like to remove. Select the Brain.
10. Place the brain in an MMI.
11. Carry the MMI over to your finished Cyborg construct that you made before, and click on it to add the brain into the Cyborg.

You can also use a normal table instead of an operating table, but this makes operations have a 20% chance of failing.

So You Decapitated Your Patient? Don't panic just yet! You can still complete the brain extraction. It's actually easier then extracting the brain from an attached head. Use a Scalpel to extract the Decapitated heads organs.

Expand

Spiderbot

Spiderbots are temporary bodies for brains.

They can zap things, move through vents, and generally act like pests.

Combine the following:

• Robot head.
• Manipulator.
• Occupied MMI or positronic brain.

When you need to remove the brain from the spider bot, you just swipe your ID to pop out the brain.

An emagged spiderbot gains a more powerful shock and increased health, while also binding it to the command of who emagged it. If the spiderbot is to die, it will detonate, destroying the occupant and maiming those around it.

Mechanical Maintenance

You'll often have Cyborgs run up to you with any number of problems. Here's how to deal with them most of the time.

Expand

Repair

When Cyborgs get dented, they'll come to you for repairs. Luckily, most repairs are simple

1. Equip a Welding helmet on your head.
   • Note: Be sure to remember this step or you could go blind!
2. Place a Welder in your hand, click on it while it's in your hand to light it, then click on the Cyborg repeatedly to repair it. Engineer cyborgs can also repair other cyborgs like this, though not theirselves.

Occasionally Cyborgs are inflicted by more advanced damage that hurts their internal wiring. If this is the case:

1. Swipe an ID with Robotics access to unlock the panel.
2. Crowbar open the panel.
3. Remove the cyborg's power cell by clicking on it with an empty hand.
4. Use a screwdriver to expose the wires.
5. Use a cable coil to replace damaged wires.
6. Screwdriver the cyborg to hide the wires.
7. Reinsert the cyborg's power cell.
8. Crowbar the panel shut.
9. Swipe an ID with Robotics access to relock the cover.

Expand

Cyborg Component Repair

Sometimes robots will have damaged components that need to be removed and replaced. Removing them is pretty straightforward. To find which component is the damaged one, you can use a handy tool called the Cyborg Analyzer. The most common part to be replaced will be the armour, as this is the first part that takes damage before the other, more important parts, start taking damage.

1. Swipe an ID with Robotics access to unlock the panel.
2. Crowbar open the panel.
3. Remove the cyborg's power cell by clicking on it with an empty hand.
4. Use a screwdriver to expose the wires.
5. Crowbar out the desired component.

Occasionally a robot will be so damaged that only the brain is salvageable, or perhaps it's volunteering for an AI core. You can remove the brain by following these steps.

1. Swipe an ID with Robotics access to unlock the panel.
2. Crowbar open the panel.
3. Remove the cyborg's power cell by clicking on it with an empty hand.
4. Use a screwdriver to expose the wires.
5. Cut all five wires with wirecutters.
6. Use a crowbar to remove the MMI.

Expand

Human Prosthetic Repair

You may be asked to repair damage to the artificial limbs of your fellow crew members.

To fix brute damage:

1. Use a welding tool on the damaged area.

To fix burn damage:

1. Use a cable coil on the damaged area.

Expand

Upgrading the Power Cell

Cyborgs that start when the game starts will likely come straight to you for an upgrade in the first few minutes of the game.

Help them out by upgrading their power cell, which will lessen the amount of time they need to visit the recharging station. Click on the Cyborg with the following items (in order):

1. Swipe an ID with Robotics access to unlock the panel.
2. Crowbar open the panel.
3. Click on the Cyborg with an empty hand to take out the power cell and replace it with the higher-capacity power cell.
   • Note: The default power cell capacity in Cyborgs is 10,000. All of the power cells you find in your office should be at least 15,000, and the Science Department can research power cells that exceed 30,000, and Xenobiology can make slime core cells which self-recharge.
4. Crowbar the panel shut.
5. Swipe an ID with Robotics access to relock the cover.

Expand

Upgrade Modules

Not only can you build and repair Cyborgs, but they also come to you to get upgrades installed once RnD has them researched. These have their category in the exosuit fabricator.

The available upgrade modules are:

• Reset Module: Not an upgrade at all, this simply resets a borg's module, letting it change from one specialization to another.
• Rename Module: Allows for the names of borgs to be changed.
• Restart Module: Use this module to restart a borg that was destroyed and has since been repaired.
• VTEC Module: Increases the speed of a borg, rather useful.
• Ion Thrusters: A jetpack for cyborgs. Allows a cyborg to move in zero-g, allowing space travel.
• Diamond Mining Drill: Upgrades the built-in mining drill, letting it drill faster. Only works on mining cyborgs.
• Mining Satchel of Holding: Upgrades the cyborg's mining storage, allowing it to hold more minerals. Only works on mining cyborgs.
• Safety Override Module: Unlocks a cyborg's illegal and more dangerous equipment, the same equipment that's unlocked by emagging.
• Self Repair Module: Allows a cyborg to slowly repair damage to itself.

To apply any of these modules:

1. Swipe an ID with Robotics access to unlock the panel.
2. Crowbar open the panel.
3. File:Cyborg upgrade1.png Print out the upgrade in the fabricator and insert it into the cyborg.
4. Crowbar the panel shut.
5. Swipe an ID with Robotics access to relock the cover.

Expand

Modifications and Deconstruction

Cyborgs that have had their programming tampered with can be repaired by resetting their AI connection and LawSync status, by manually pulsing the wiring.

In the unlikely event that an AI goes crazy, a trained Roboticist or another technician should be able to sever the connection to the AI entirely by cutting the correct wire.

Cutting all wires allows you to deconstruct a cyborg completely with a crowbar.

There are four lights in the cyborg with four corresponding wires, as well as a dud wire without a light:

	Description	Pulsing	Cutting	CollapseMending
LawSync	If this light is on, it means that any laws uploaded to the AI are also uploaded to the cyborg. The cyborg cannot be given different laws to the AI as long as this is on. This light will turn off if the AI Link light is off, regardless of wire status.	does nothing.	will do nothing, as long as the AI link light is on. If the AI link light is off, cutting and then turning the AI link back on will cause the cyborg to be slaved to an AI, but not synced with its laws.	this wire will turn the LawSync light back on as long as the AI link light is also on. The cyborg will then resume syncing with the AI's laws. If the AI link light is off, mending this will turn the light on, only for it to turn off again.
AI Link	If this light is on, it shows that the Cyborg is slaved to an AI and must follow that AI's orders.	this wire allows you to pick an AI for the cyborg to be slaved to if there are multiple AIs. If there is only one AI, pulsing this will simply turn it on and slave the cyborg to it, if it is off.	this wire will cause the Cyborg to no longer be enslaved under the AI and bound only by its laws. This also turns off LawSync, as the cyborg has no AI to sync to.	this wire does nothing. You need to pulse it to reconnect it to an AI.
Camera	If this light is on, the cyborg's vision is linked to the AI's cameras.	this wire will loudly focus the cyborg's cameras, displaying a message in the chat, kicking anyone watching from the cyborg's cameras out, and disable the camera link to the AI. It will not enable the cameras once disabled.	this wire will disable the cyborg's cameras.	this wire will reconnect the cyborg's cameras to the AI if they are disabled.
Lockdown	If this light is on, the cyborg is unable to move. They are still able to remotely activate devices.	this wire will toggle lockdown function on the cyborg, similar to using the Robotics Control Console.	this wire will lock the cyborg down, similar to pulsing.	this wire will activate the cyborg's movement once again.

An emagged cyborg will have no LawSync or AI link and cannot be reset, meaning that deconstructing and placing into a new body is necessary.

Remember, cyborgs are very expensive! Do not destroy them unless the cyborg is completely out of control, and resetting the AI and LawSync status doesn't work.

Bots

As a Roboticist, you serve another important purpose, making NPC Bots. Bots can benefit the station in many ways and are easy to create. There are two ways to craft these bots. The first being through using the crafting menu, which requires you to have all of the materials present near you or in your possession. Using this will completely build the bot, but will always create a default version of that bot. The other method is manual assembly, the process to do so is listed below. This method allows you to name the bot with a pen during the assembly process and lets you create bots of different colour depending on the colour of the toolbox/health kit used. The current list of bots, and how to make them, are as follows:

Expand

Medibot

These will only inject chemicals if the chemical helps with the target's damage by default.

Note that these don't synthesize their chemicals, except Saline-Glucose Solution, Charcoal, and Spaceacillin.

To make:

1. Cyborg Right or Left Arm.
2. Empty First Aid Kit.
   • Note: Differently coloured medkits will also change the resulting colour of your Medibot.
3. (Optional) Name the bot with a Pen.
4. Health analyzer.
5. Proximity sensor.
6. (Optional) Beaker filled with the medicine of your choice.

They can also be Emagged to repeatedly inject anyone with harmful chemicals.

Expand

Cleanbot

Cleanbots are great, as they serve the exact same purpose as the Janitor.

Even better is that it uses Space Cleaner to mop, so no slipping on everything!

To make:

1. Bucket (Grab it from the Janitor or make with Autolathe)
2. Proximity sensor.
3. (Optional) Name the bot with a Pen.
4. Cyborg Right or Left Arm.

An emagged cleanbot will spray slippery foam around it, while still responding to any mess in visual range, or continuing its patrol.

Expand

Floorbot

Floorbots are nice to have around when some asshole starts crowbarring up floor tiles, or some traitor has blown apart a section of the station.

They zoom around and repair busted floor tiles. Keep in mind that Floorbots have a limited number of floor tiles. This number can be observed by popping up their control panel.

To make:

1. Empty Toolbox
2. 10 floor tiles (click on a stack of metal while it's in your hand to open a menu for making these)
3. Proximity sensor.
4. (Optional) Name the bot with a Pen.
5. Cyborg Right or Left Arm.

Emagged Floorbots will tear apart floor panels and plating, usually exposing the area to space. Great if you don't need to worry about being in a vacuum.

Expand

Securitron

Basically, Officer Beepsky without the personality.

Note that destroying a Securitron or Officer Beepsky with a melee weapon is all but impossible by yourself; striking them causes them to immediately stun and cuff you. If you work with another person, you can get several hits in while it is cuffing the other person, which is often enough to destroy it outright.

To make:

1. Use a Screwdriver on a Remote Signaling Device
2. Combine with a Helmet (Get these from Security)
3. Weld them together
4. Add a Proximity Sensor and a Robot Arm.
5. Toss in a Stun Baton

You usually won't need to build any of these, but they can be hilariously helpful for traitors who have invested in a Cryptographic Sequencer (E-mag), as they tend to run around stunning and cuffing everyone in sight. Problem is, hacked Securitrons report a Level 10 Infraction when spotting people, giving a clear sign that they're hacked.

Expand

ED-209

Beepsky's bigger brother.

Has all of the abilities of a standard Securitron, with the addition of a ranged attack.

To make:

1. Use a Metal sheet on a Cyborg Endoskeleton to reinforce it.
2. Add two Robot Legs and a Security vest.
3. Weld everything together.
4. Add in a security Helmet.
5. Attach a Proximity Sensor to the assembly.
6. Insert Wires.
7. Add a disabler and attach it with a Screwdriver.
8. Insert a Power cell. Your own murder-robot is complete!

An emagged ED-209 fires deadly lasers AND attacks anyone on sight. Anyone emagging an ED-209 is advised to run like crazy.

Expand

General Griefsky

A Securitron with 4 energy swords.

To make:

1. Use a Screwdriver on a Remote Signaling Device
2. Combine with a Helmet (Get these from Security)
3. Weld them together
4. Add a Proximity Sensor and a Robot Arm.
5. Use a Wrench
6. Add four Energy Swords or Toy Energy Swords.

Extremely lethal.

Expand

Honkbot

It's annoying and useless, but the clown might bug you to make one of this in the absence of a H.O.N.K. mech. God forbid if a traitor emags the thing.

To make:

1. Construct a Clown Box (Get the Clown to stamp a piece of cardboard with the clown stamp).
2. Add a robotic right arm.
3. Add a Proximity sensor.
4. Add a Clown bikehorn.
5. Add a Trombone (you'll probably need to order a Musical Instruments crate from Cargo).

Emagged Honkbots make random noises, airhorn unsuspecting crew, and laugh at their misery.

pAI-Controlled Bots
The NPC bot not doing it enough for you, not enough personality? You can now place pAIs into bots, excluding the Security designs, to wander around and assist! Take your wanted bot and simply click on it with an active pAI, you now have a pAI Bot.

• pAI Bots still spout automated messages if they weren't turned off.
• Emagging a pAI Bot causes the pAI to be ejected out.

Machine People

IRCs

Robotics can make player-controlled assistants called Integrated Robotic Chassis or IRCs. IRCs are functionally the same as an IPC but with one key difference in that IRCs are bound to serve the one who imprinted onto their Robotic brain and is expected to follow whatever orders they are given. IRCs made with MMIs are not bound to their creator the same as robotic brains, as they have no master.

IRC Construction

1. First make the "Integrated Robotic Chassis" on the "Misc" screen in the Exosuit Fabricator. It will then make the torso of the IRC. Drag the torso over to the surgery table and lay it down there.
2. Build the IPC Head, Microbattery, Charger, Optical Sensor, and Microphone as well as a cyborg right arm, left arm, right leg, and left leg.
3. Once all of these pieces are done, attach the head and limbs to the torso by picking it up and then clicking on the torso with the corresponding body part targeted. (So if cyborg right arm, target the right arm on the ).
4. Do IPC Internal Cybernetic Manipulation surgery on the upper body and install the IPC Microbattery and Robotic Brain there.
5. Do IPC Internal Cybernetic Manipulation surgery on the head and install the IPC Optical Sensor and IPC Microphone there.
6. Do IPC Internal Cybernetic Manipulation surgery on either arm and install the IPC Charger there.

Once all of these steps have been completed you will have a fully functional IRC assistant ready to go.

IPC Repair

It's not uncommon in robotics for you to have to repair an IPC, as you are their Medbay. Healing them is generally much more simple than their organic counterparts, as you can repair most damage with just a welder and a cable coil. As long as the damage to an IPCs limb isn't severe, a few blasts with a welder or adding some new cable will do the trick. For extremely light damage, you can use upgraded cyborg chargers to your advantage, as they can heal some brute and burn damage, almost like a cryotube. Some limbs may be more damaged than others, and you can tell this by once again using a Cyborg Analyzer. It will tell you each limb's individual brute and burn damage, as well as internal component damage. The analyzer also works on humans if they have mechanical limbs, though this is mostly organic surgery which is not explained here.

For more severe damage, it may say that the damage to a limb cannot be repaired externally, in which case you will have to do the cybernetic repair surgery detailed below. For organ damage, something that happens mostly when IPCs get hit by EMPs, that can be fixed by doing Internal Component Manipulation, and healing the organ using either Nanopaste or simply using a screwdriver. Another thing you can do if the damage is specific to the IPC's brain is use Liquid Solder, a chemical which heals exclusively brain damage, similar to mannitol to organics.

When an IPC goes into crit, which is when it has taken over 100 points of damage, it will rapidly take both brute damage and will only stop once their health gets above 0 again. To combat this, if you cannot get them above that due to the constant damage, one option is to remove the robotic brain, which does kill the IPC, but also means that it won't take the crit damage anymore. You can put the brain on the table while you take your time repairing the body, having a nice chat with them while there before placing it back in the chest when done.

IPC Surgery

There are are also several procedures that can be performed on IPCs. IPCs don't feel pain and can't get infections, so don't worry about administering anaesthetics or washing your hands. If RnD has the tech for it, bug them for a Nanopaste, or if you have a Protolathe yourself, make one. Remember that IPC brains are in their chest, not their head.

Expand

Robotic Cavity Implant/Removal

Removal of Items from robotic body cavities, sometimes confused with Internal Component Manipulation or Bio-chip Removal.

1. Aim for the implant location on the Damage Zone;
2. Use the Screwdriver to select the "Robotic Cavity Implant/Removal" Surgery;
3. Use a Screwdriver to unlock the hatch on the limb;
4. Use a Crowbar to open the hatch on the limb;
5. (Insertion) While holding an Item: Insert the item inside;
6. (Extraction) With an open hand: Click the patient to check for items inside the cavity;
7. Use a Cautery to mend the cavity;
8. Use a Crowbar to close the hatch on the limb

Expand

Bio-chip Removal (Synthethics)

Removing Bio-chips from the body. Sometimes referred to as Implant Removal.

1. Aim for the implant location on the Damage Zone;
2. Use the Screwdriver to select the "Bio-chip Removal" Surgery;
3. Use a Screwdriver to unlock the hatch on the limb;
4. Use a Crowbar to open the hatch on the limb;
5. Use your Crowbar to extract the Bio-chip. This may take several goes;
6. Use Retractors to close the hatch on the limb

Expand

Cybernetic Repair

Fixing mechanical arms, legs, hands and feet.

1. Aim for the patient's correct Damage Zone;
2. Use the Screwdriver to select the "Cybernetic Repair" Surgery;
3. Use a Screwdriver to unlock the hatch on the limb;
4. Use a Crowbar to open the hatch on the limb;
5. Use a Welding tool to repair Brute damage and use Cable coil to repair burn damage;
6. Use a Crowbar to close the hatch on the limb

Expand

Internal Component Manipulation

Mending, removal, and insertion of posibrains, microbatteries, optical sensors, and implants.

1. Aim for the patient's correct Damage Zone;
2. Use the Screwdriver to select the "Internal Cybernetic Manipulation" Surgery;
3. Use a Screwdriver to unlock the hatch on the limb;
4. Use a Crowbar to open the hatch on the limb;
5. (Optional) Use a Multitool to remove Components. For Borgification simply remove the Positronic brain and place the positronic brain in an empty cyborg exoskeleton, or give the positronic brain to a Roboticist.
6. (Optional) While holding a Component or Implant: Insert the Component inside;
7. (Optional) While holding a Positronic Brain, or a Man Machine Interface: Insert the brain inside;
8. Repair the affected component with a Screwdriver, or alternatively use Nanopaste.
9. (Optional) Use a Welding tool to repair Brute damage and use Cable coil to repair burn damage;
10. Use a Crowbar to close the hatch on the limb

Expand

Robotic Limb Amputation

"173. IPC interns are not to be punished for incompetence by having their "limb privileges" revoked." - Things Comms Officer Jenkins is Not Allowed To Do in CentCom

1. Aim for the patient's correct Damage Zone;
2. Use the Screwdriver to select the "Robotic Limb Amputation" Surgery;
3. Use a Multitool to remove the targeted limb

Expand

Robotic Limb Attachment

"I can't believe that playing card chopped off my left arm!" - ARMA-732

1. Aim for the patient's correct Damage Zone;
2. (Optional) Use the Screwdriver to select the "Apply Robotic or Synthetic Limb" Surgery;
3. Apply the robotic limb, or a new limb printed from your Exosuit Fabricator

Expand

Cybernetic Appearance Customization

For when the Unbranded style doesn't look good after all.

1. Aim for the patient's correct Damage Zone;
2. Use the Screwdriver to select the "Cybernetic Appearance Customization" Surgery;
3. Use a Screwdriver to unlock the hatch on the limb;
4. Use a Crowbar to open the hatch on the limb;
5. Use a Multitool to reprogram the limbs appearance;
6. Select the company appearance. The most common appearance among IPCs being Morpheus Cybernetics;
7. Use a Crowbar to close the hatch on the limb

Exosuits

Construction of exosuits are restricted by ID, so they are typically the product of roboticists and the Research Director. These can be tremendously helpful or tremendously annoying depending on who uses it. They take more work to make than robots and require special circuits, which are obtained through the Quartermaster or made in the Circuit Imprinter. Gygax and Durands in addition require stock parts from the Protolathe after R&D has done enough research, and Phazons are the most difficult, requiring an anomaly core, which are rare to get and may be fought over in science.

Following the roboticist's SOP, utility mechs such as Ripleys, Firefighting Ripleys, and Odysseus' are free to be made on every code. Combat mechs require the Captain or HoS' permission to be made during green, and can be made freely during blue and red, so long as they are delivered to the armoury when finished (this does not mean that you should make an entire army of Durands as soon as the code goes up to blue). Other parts of SOP say that tracking beacons must be placed on all mechs, and that they must be DNA-locked until thay are delivered to their department.

Make sure you have the required materials to finish an exosuit before you begin construction. The amount of raw material required for each mech can be found in the following table, assuming an unupgraded exosuit fabricator. For each level of laser part (micro-laser -> high-power micro-laser -> ultra-high-power micro-laser -> quad-ultra micro-laser) multiply the total material amounts by (1 -> 0.85 -> 0.7 -> 0.55).

Exosuit name	Metal	Glass	Silver	Titanium	Diamond	Uranium	Plasma	Bananium	Tranquilite
Ripley/Firefighter APLU	100,000	7,500	0	0	0	0	0	0	0
Odysseus	65,000	10,000	0	0	0	0	0	0	0
Gygax	125,000	15,000	0	10,000	20,000	0	0	0	0
Durand	140,000	25,000	28,000	20,000	0	25,000	0	0	0
Phazon	175,000	15,000	0	20,000	0	0	90,000	0	0
HONK MECH	120,000	15,000	0	0	0	0	0	35,000	0
Reticence	120,000	15,000	0	0	0	0	0	0	35,000

Exosuit Construction

Expand

Ripley APLU

The Ripley APLU (Autonomous Power Loading Unit) is a slow moving, decently protected exosuit.

Generally, it can take down a Gygax because of the sheer power of the drill, but it does not make a good combat exosuit because it is slow and has no range. Best used against Spess carp invasions, blobs, Changelings, and for gaining clout with the miners.

Instructions

• Build all of the Ripley parts using the exosuit fabricator.
• Build a Hydraulic Clamp and Drill
• Attach all of the parts to the Ripley chassis (Except the Clamp and Drill)
• Wrench
• Screwdriver
• Cable Coil
• Wirecutters
• Ripley central control module (Ordered from the Quartermaster or made in the Circuit Imprinter)
• Screwdriver
• Ripley Peripherals control module (Ordered from the Quartermaster or made in the Circuit Imprinter)
• Screwdriver
• 5 pieces of metal
• Wrench
• Welding tool
• 5 pieces of plasteel
• Wrench
• Welding tool

The Ripley should be complete, to access it use your ID card on it. The codes on the system mean that you have to have access to those places on your ID to use the exosuit. Click finish, then right-click to enter.

Expand

Firefighter APLU

The Firefighter APLU (Autonomous Power Loading Unit) is a slow-moving, decently protected exosuit with extra fire resistance.

The unique part is the Firefighter chassis and firesuit, otherwise, it uses the same Ripley APLU parts and materials.

Instructions

• Build all Firefighter parts using the exosuit fabricator.
• Assemble all of the Ripley parts to the Firefighter chassis.
• Add a firesuit
• Wrench
• Screwdriver
• Cable Coil
• Wirecutters
• Ripley central control module (Ordered from the Quartermaster, made in the Circuit Imprinter)
• Screwdriver
• Ripley Peripherals control module (Ordered from the Quartermaster, made in the Circuit Imprinter)
• Screwdriver
• 5 pieces of plasteel
• Wrench
• Welding tool
• 5 pieces of plasteel
• 5 pieces of plasteel
• Wrench
• Welding tool

Expand

Odysseus

This mech can save multiple crewmembers while on the run.

Is the only medical mech available unlike the dozens of variations of the APLU and Combat series, maybe coders just consider BIG GUNZ better than syringes?

Instructions

• Create all of the Odysseus parts using the exosuit fabricator.
• Assemble all of the Odysseus parts to the chassis
• Wrench
• Screwdriver
• Cable coil
• Wirecutters
• Odysseus mainboard (Made in the Circuit Imprinter)
• Screwdriver
• Odysseus peripherals board (Made in the Circuit Imprinter)
• Screwdriver
• 5 pieces of metal
• Wrench
• Welding tool
• 5 pieces of plasteel
• Wrench
• Welding tool

Expand

Gygax

Rather fast security exosuit with good overall protection.

Very low battery life, so be sure to watch it. Requires diamond sheets to complete.

Leg Actuators Overload Function (Movement speed doubled and a small amount of damage dealt with each step. Disables when Gygax integrity drops below 2/3)
Melee capable (this mech can use its mecha arms to punch and smash)

Instructions

• Create all of the Gygax parts using the exosuit fabricator.
• Assemble all of the Gygax parts to the chassis (Except the Armor plates)
• Wrench
• Screwdriver
• Cable Coil
• Wirecutters
• Gygax Main circuit board (Made in the Circuit Imprinter)
• Screwdriver
• Gygax Peripherals circuit board (Made in the Circuit Imprinter)
• Screwdriver
• Gygax Targeting circuit board (Made in the Circuit Imprinter)
• Screwdriver
• Add an Advanced Scanning Module (Made in the Protolathe)
• Screwdriver
• Add a Mech Power Core (Obtainable from cargo)
• Screwdriver
• Add some metal
• Wrench
• Welding tool
• Add Gygax Armor Plates (Made in the Exosuit Fabricator)
• Wrench
• Welding tool

Expand

Durand

A Durand is more powerful than Gygax, it has more health and better armoured, but slower.

Requires silver sheets to complete.

Defence Mode Function (Boosts Durand armour with the penalty of not being able to move or turn)
Melee capable (this mech can use its mecha arms to punch and smash)

Instructions

• Create all of the Durand parts using the exosuit fabricator.
• Assemble all of the Durand parts to the chassis (Except the Armor plates)
• Wrench
• Screwdriver
• Cable Coil
• Wirecutters
• Durand Main circuit board (Made in the Circuit Imprinter)
• Screwdriver
• Durand Peripherals circuit board (Made in the Circuit Imprinter)
• Screwdriver
• Durand Targeting circuit board (Made in the Circuit Imprinter)
• Screwdriver
• Add a Phasic Scanning Module (Made in the Protolathe)
• Screwdriver
• Add a Mech Power Core (Obtainable from cargo)
• Screwdriver
• Add some metal
• Wrench
• Welding tool
• Add Durand Armor Plates (Made in the Exosuit Fabricator)
• Wrench
• Welding tool

Expand

Phazon

Phazons are the most advanced mechs on the market. While it doesn't have as much health as the Gygax or Durand, it allows users to move through solid objects at a very high speed.

Requires an anomaly core to build which comes from a random event.

Phasing Function (Allows the Phazon to move through any solid object at high speed)
Change melee damage type (Allows the Phazon to either deal brute, fire or toxic damage)

Instructions

• Create all of the Phazon parts using the exosuit fabricator.
• Assemble all of the Phazon parts to the chassis (Except the Armor plates)
• Wrench
• Screwdriver
• Cable Coil
• Wirecutters
• Phazon Main circuit board (Made in the Circuit Imprinter)
• Screwdriver
• Phazon Peripherals circuit board (Made in the Circuit Imprinter)
• Screwdriver
• Phazon Targeting circuit board (Made in the Circuit Imprinter)
• Screwdriver
• Add a Phasic Scanning Module (Made in the Protolathe)
• Screwdriver
• Add a Super Capacitor (Made in the Protolathe)
• Screwdriver
• Add 5 (Artificial) Bluespace Crystal (Found in the ORM or made in the Protolathe)
• Cable Coil
• Screwdriver
• Add some plasteel
• Wrench
• Welding Tool
• Add Phazon Armor Plates (Made in the Exosuit Fabricator)
• Wrench
• Welding Tool
• Add a bluespace anomaly core (A normal anomaly core won't work!).

Expand

HONK MECH

Bring the HONK power of the HONKmother to the crew! HONK! Cry when you are arrested for making this.

Requires bananium sheets to complete. The mech has a Clown Office ID lock by default. This mech requires clear permission from both the Captain and RD before construction.

Instructions

• Create all of the H.O.N.K. mech parts in the Exosuit Fabricator
• Attach all of the H.O.N.K. mech parts to the H.O.N.K. mech chassis
• HONK at the mech with a bike horn
• Add the main circuit board
• HONK at the mech again
• Add the peripherals circuit board
• HONK at the mech again
• Add the targeting circuit board
• HONK at the mech again
• Add the clown's mask to the mech
• HONK at the mech again
• Add clown shoes to it
• HONK at the mech again

Expand

Reticence

...

Requires Tranquilite sheets to complete. The mech has a Mime Office ID lock by default. The Reticence moves silently.

When emoting at a mech you have to use an audible emote. *snap is a great example

Instructions

• Create all of the Reticence parts in the Exosuit Fabricator
• Attach all of the Reticence parts to the Reticence chassis
• Add the main circuit board
• Add the peripherals circuit board
• Add the targeting circuit board
• Add the mime's beret to the mech
• Emote at the mech
• Add the mime's mask to the mech
• Emote at the mech again
• Add the mime's suspenders to it
• Emote at the mech again

Exosuit Maintenance

Expand

Replacing Batteries

• Make sure the ID upload panel is closed and ensure Maintenance Mode is not forbidden in the Exosuit's internal settings.
• Hit the exosuit with your ID card or PDA with one inside and enable Maintenance Mode.
• Wrench
• Crowbar
• Screwdriver
• Replace cell
• Screwdriver
• Crowbar
• Wrench
• ID

Note: The default capacity of a power cell in any of the civilian exosuits is a High-Capacity Power Cell+ (15,000)

Expand

Repair

• Equip a welding helmet on your head.
  • Note: Be sure to remember this step or you could go blind!
• Place a welder in your hand, click on it while it's in your hand to light it, then click on the Exosuit repeatedly to repair it.

Expand

Removal of Jammed User

If the driver of an exosuit is unconscious in his exosuit; you can remove him/her by following a series of steps. This also works upon MMIs and Positronic Brains which you wish to remove.

• Make sure maintenance protocols are enabled.
• Wrench
• Crowbar
• Screwdriver
• Crowbar

Expand

Critical Damage

When the mech takes approx. 50% damage, there is a chance for the mech to take 'Critical Damage.' This usually is the failure of a system within the mech itself. Each failure has a different way to repair it.

Calibration Failure - Causes your mech to move around, usually in a large circle, rather than move in the direction of your input. The mech can and will move diagonals while this is in effect. To repair, open 'View Stats', and at the top of the page is a button labelled something along the lines of 'Recalibrate.' Click it, and wait for the recalibration to complete, and your mech will move as normal.

Internal Fire - Causes your mech to take damage over time. This lasts for about 15–30 seconds and will go away on its own. It will cause the cabin air to heat up, burning the pilot. The internal air tank may also rupture from heat.

Life Support Failure - Renders your internal life support useless. This won't matter much in a pressurized environment, but if you're fighting a fire in a Firefighting Ripley, you're going to die. To fix this, enable your maintenance protocols, and perform the same steps to replace a battery. This will fix the error.

Air Tank Rupture - Your mech will no longer pump air into the cabin of your mech. This does not matter if you are not running on internal air. To fix this, simply repair the mech with a welder.

Exosuit Equipment

Various tools and weapons can be attached to Exosuits, providing them with the ability to perform different tasks. Exosuit Equipment is built by Exosuit Fabricator ("Exosuit Equipment" menu). To attach a tool or weapon, simply click with it on an Exosuit. Exosuits have limited equipment space depending on their type.

Exosuit Equipment comes in several categories:

• General: Can be attached to any exosuit.
• Medical: Can only be attached to the Odysseus.
• Industrial: Can only be attached to APLUs.
• Combat: Can only be attached to Durand, Gygax, Marauder, Phazon, and other combat mechs.
• Special: Special equipment reserved for the H.O.N.K or Reticence mechs.

General EquipmentIndustrial EquipmentMedical EquipmentCombat EquipmentSpecial Equipment

Icon	Name	Description	Required Tech Levels	CollapseRequired Materials
	Exosuit Module (Tesla Energy Relay)	A tesla energy relay system that passively recharges a mech using power from nearby APCs.	4 EM Spectrum 3 Power Storage	10000 Metal 2000 Glass 2000 Gold 3000 Silver
	Exosuit Equipment (Plasma Generator)	An exosuit module that generates power using solid plasma as fuel. Pollutes the environment.	None	10000 Metal 1000 Glass 2000 Silver 5000 Plasma
	Exosuit Module (ExoNuclear Reactor)	A compact nuclear reactor that efficiently turns uranium sheets into electricity. Irradiates everything in an around the mech, including the pilot.	3 Power Storage 3 Engineering 3 Materials	10000 Metal 1000 Glass 500 Silver
	Exosuit Module (Repair Droid Module)	An automated Repair Droid. Consumes power to repair your mech.	3 EM Spectrum 3 Data Theory 3 Engineering	10000 Metal 5000 Glass 1000 Gold 2000 Silver
	Exosuit Module (Reactive Armor Booster Module)	An exosuit-mounted armor booster that decreases melee damage taken.	5 Materials 4 Combat	20000 Metal 5000 Silver
	Exosuit Module (Reflective Armor Booster Module)	An exosuit-mounted armor booster that decreases damage taken from ranged weapons.	5 Materials 5 Combat 3 Engineering	20000 Metal 5000 Gold
	Exosuit Module (Gravitational Catapult Module)	An exosuit mounted gravity catapult. Can be used to fling objects and people around. Has two modes, S and P. S mode will select an object, then fling it towards a point. P mode will push all nearby objects away from a point.	2 Bluespace 3 EM Spectrum 3 Engineering	10000 Metal

Icon	Name	Description	Required Tech Levels	CollapseRequired Materials
	Exosuit Engineering Equipment (Extinguisher)	Equipment for engineering exosuits. A rapid-firing high capacity fire extinguisher.	None	10000 Metal
	Exosuit Engineering Equipment (Cable Layer)	Equipment for engineering exosuits. Lays cable along the exosuit's path.	None	10000 Metal
	Exosuit Engineering Equipment (Hydraulic Clamp)	Equipment for engineering exosuits. Lifts objects and loads them into cargo. Essential for mining mecha.	None	10000 Metal
	Exosuit Engineering Equipment (Drill)	Equipment for engineering and combat exosuits. This is the drill that'll pierce the heavens! Essential for mining mecha.	None	10000 Metal
	Exosuit Module (Diamond Mining Drill)	An upgraded version of the standard drill. Capable of piercing Reinforced Walls.	4 Materials 3 Engineering	10000 Metal 6500 Diamond
	Exosuit Engineering Equipment (Mining Scanner)	Equipment for engineering and combat exosuits. It will automatically check surrounding rock for useful minerals. Essential for mining mecha.	None	5000 Metal 2500 Glass
	Exosuit Module (RCD Module)	An exosuit-mounted Rapid Construction Device.	4 Materials 3 Bluespace 4 EM Spectrum 4 Power Storage 4 Engineering	30000 Metal 20000 Gold 25000 Plasma 20000 Silver
	Exosuit Module Design (217-D Heavy Plasma Cutter)	A device that shoots resonant plasma bursts at extreme velocity. The blasts are capable of crushing rock and demolishing solid obstacles. Useful for mining mecha.	5 Materials 4 Engineering 4 Plasma	10000 Metal 2000 Glass 6000 Plamsa

Icon	Name	Description	Required Tech Levels	CollapseRequired Materials
	Exosuit Medical Equipment (Mounted Sleeper)	A mounted sleeper that stabilizes patients and can inject reagents in the exosuit's reserves.	3 Engineering 2 Plasma 3 Biotech	5000 Metal 10000 Glass
	Exosuit Medical Equipment (Syringe Gun)	A chem synthesizer, scanner, and syringe gun all in one! Reagents inside are held in stasis, so no reactions will occur. Must be equipped to scan reagents for the Mounted Sleeper. Has two modes. S will scan reagents from nearby containers. F will "throw" syringes loaded with whatever mixture the internal chemical reserve contains at a target.	4 Materials 4 Biotech 3 Combat 4 EM Spectrum	3000 Metal 2000 Glass
	Exosuit Medical Equipment (Rescue Jaw)	Emergency rescue jaws, designed to help first responders reach their patients. Opens doors and removes obstacles.	4 Materials 6 Engineering 6 EM Spectrum	5000 Metal 2000 Silver 1500 Titanium

Icon	Name	Description	Required Tech Levels	CollapseRequired Materials
	Exosuit Weapon (ZFI Immolation Beam Gun)	A weapon for combat exosuits. Fires beams of extreme heat that set targets on fire.	5 Materials 6 Combat 5 EM Spectrum	10000 Metal 8000 Silver 8000 Plasma
	Exosuit Weapon (CH-PL "Firedart" laser)	A light laser cannon that fires quickly and consumes little power, but does less damage than the Solaris.	3 Engineering 3 Combat 3 EM Spectrum	10000 Metal
	Exosuit Weapon (CH-LC "Solaris" Laser Cannon)	A heavy laser cannon that deals a large amount of damage at the cost of slow fire rate and high power consumption. Excellent against Blobs.	4 Engineering 4 Combat 4 EM Spectrum	10000 Metal
	Exosuit Weapon (MKIV Ion Heavy Cannon)	A mech-mounted weapon that fires a projectile identical to the Ion Rifle. Slow fire rate.	6 Combat 5 EM Spectrum 5 Materials	20000 Metal 6000 Silver 2000 Uranium
	Exosuit Weapon (P-X Tesla Cannon)	A weapon for combat exosuits. Fires bolts of electricity similar to the experimental tesla engine.	5 Materials 6 Combat 5 EM Spectrum	20000 Metal 8000 Silver
	Exosuit Weapon (CH-PD Disabler "Peacemaker")	A weapon for combat exosuits. Shoots basic disablers.	3 Combat	10000 Metal
	Exosuit Weapon (LBX AC 10 "Scattershot")	A mech-mounted shotgun. This weapon fires four projectiles in a spread, which also deal stamina damage. Very effective against creatures that take stamina damage, but poor against those that do not.	4 Combat	10000 Metal
	Exosuit Weapon ("Ultra AC 2" LMG)	A mech mounted light machine gun. Fires in three-shot bursts.	4 Combat	10000 Metal
	Exosuit Weapon (SRM-8 Missile Rack)	A mech-mounted missle rack capable of firing eight rockets before reloading. These rockets have a small blast radius, and usually will not penetrate hull.	6 Combat 6 Materials	22000 Metal 6000 Gold 8000 Silver
	Exosuit Weapon (SGL-6 Flashbang Launcher)	A rotary-cylinder flashbang launcher, capable of firing six flashbangs before reloading. Annoying and debilitating on the scale of a HONK mech if used without discretion.	3 Combat	22000 Metal 6000 Gold 8000 Silver
	Exosuit Weapon Design (PCMK-6 Bola Launcher)	A mech mounted bola launcher useful for slowing criminals down. Effective at keeping criminals from otherwise easily outrunning your mech.	3 Comabt	10000 Metal

Icon	Name	Description	Required Tech Levels	CollapseRequired Materials
	H.O.N.K Banana Mortar	A specialized exosuit banana mortar used for delivering bananas where needed.	None	20000 Metal 5000 Bananium
	H.O.N.K Mousetrap Mortar	Fairly tame for the H.O.N.K, this weapon fires primed mousetraps.	None	20000 Metal 5000 Bananium
	HoNkER BlAsT 5000	A massive air horn capable of causing deafness, weakness, and stunning to those nearrby.	None	20000 Metal 10000 Bananium
	Exosuit Module (Mime RCD Module)	Used for quick and silent construction.	None	30000 Metal 10000 Tranquillite
	S.H.H "Quietus" Carbine	A completely silent carbine that can be fitted onto a mech. Fires silencing lethal rounds that drain the power of H.O.N.K mechs.	None	20000 Metal 10000 Tranquillite